PostPro De-Powdering System
AMT's POSTPRODP is an economical and speedy de-powdering system, that cleans powder-bed products in just 10 minutes. The machine is equipped with a cyclone, which guarantees that the abrasive is perfectly cleaned. The machine is CE and ATEX certified machine, which prevents the risk of fire or explosions.
DE-POWDERING SYSTEM FOR ADDITIVE MANUFACTURING
The POSTPRODP is CE certified . POSTPRODP is ISO 9001-2015 certified. The POSTPRODP is designed to be used in processes where the consumable media and dust are combustible. There are safety components in the machine to reduce the risk of fire or explosion. Atex class is Class II 3/-D T125°C.
System Operation
1. Product is placed in the basket which is mounted to the right access door.
2. The blasting time, blow off time, and rotation speed of the basket are set on the touch panel.
3. The blast pressure is set by a pressure regulator.
4. After closing the doors the process can begin.
Certifications
The POSTPRODP is CE certified. POSTPRODP is ISO 9001-2015 certified. The POSTPRODP is designed to be used in processes where the consumable media and dust are combustible. There are safety components in the machine to reduce the risk of fire or explosion. Atex class is Class II 3/-D T125°C.
Blast Media
The cabinets are suitable for all common abrasives such as corundum, glass beads, ceramics, nut shells, plastic and fine grain sizes of stainless steel and steel. To determine which abrasive is most suitable for your process, AMT can perform tests and provide advice free of charge.
Warranty
The warranty period is 12 months after delivery and applies to material and construction defects. Parts subject to normal wear and tear are excluded from this. The compressed air must be clean and dry and must comply with ISO8573.1 Class 4. Products to be blasted must also be dry and free of grease.
PostPro DP MAX
PostProDP PRO
