Login  /   Register
Loading
blastitall

The LITTLE-BLASTER equipment was designed for the hobbyist or very light production use. The LITTLE-BLASTER is constructed from heavy gauge metal, which is continuously welded. Also incorporated into the line are several products from the BLAST-IT-ALL® production blasting equipment, proven reliability such as the blast gun. The LITTLE-BLASTER is also designed for a small company to start blasting with only a dust collector; then, without a lot of expense enables that user to convert to a reclamation system with the LITTLE-BLASTER Reclaimer Kit.

LB 4824

While, the LITTLE-BLASTER is limited to specifically smaller sizes than production type equipment, but it is considered the highest caliber blaster manufactured today.

lb4824-3

  • Dust Collector: 100 CFM cartridge type collector for better dust control providing cleaner working chamber.
  • Light Box: Two (2) tube 24: fluorescent light, for best possible lighting in blast chamber, On-Off control switch for light and cartridge dust collector.
  • Viewing Window: Large 12″X20″ tempered glass provides long life and minimizes static build up of dust.
  • Door Latch: Heavy-duty cam type, adjustable for positive door seal.
  • Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
  • Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
  • lb4824-2

  • Clean out door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
  • Safety Foot Control: Prevents accidental blast operation.
  • Doors: Large double walled doors (both sides) for opening size see figure “C”. Knife sealing edge assures positive seal in blast chamber.
  • Shaker Handle: Handle for shaking dust from cartridge
  • Cartridge: 8 1/2″ x 9 1/2″ cartridge with 175 2″ pleats
  • lb4824-1

  • Dust Sump: Allows dust to flow directly into waste container.
  • Media Hose: 1/2″ media hose, from media valve to bottom fitting on blast gun.
  • Media Valve: Universal Feed allowing all types of abrasives to be used. 2″ plug outlet for easy clean-out.
  • Motor: 120 volt, 15 amp switch control.
  • Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.
  • Machine Construction: Heavy 14 gauge welded steel construction. Two coats of industrial quality paint.
  • Packing: Machine secured on wood pallet, dust collector packed inside blast chamber for shipping.
  • lb4024p (1)
    0